Cam Follower and Track Roller - Stud Type

Contact Now

Stud type track roller bearings CFS3V IKO cam follower bearings is roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely.Cam Followers (Stud Type Track Rollers) Without seal With seal 1. Types Cam followers are available in the standard types shown in Table 1. These standard bearings have a screwdriver slot built into the stud head, while the outer rings have a cylindrical outside surface. Cam followers, which are equipped with a thick outer ring.

 

 

Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers.

 

 

 

 

MCGILL FCFE 3 1/2 Cam Follower and Track Roller - Stud Type

6700 rpm 60500 N
1.50 mm 90.0000 mm

MCGILL FCFE 3 Cam Follower and Track Roller - Stud Type

Open Type Plastic
In Stock 17mm

MCGILL FCFE 2 Cam Follower and Track Roller - Stud Type

14 Steel
10.1 10mm

MCGILL FCFE 2 1/2 Cam Follower and Track Roller - Stud Type

0.875 in 1322 KM
16.7 kN SAF 622

MCGILL FCFE 1 1/2 Cam Follower and Track Roller - Stud Type

0.18 KGS 50mm
Steel 13.1

MCGILL FCFE 2 3/4 Cam Follower and Track Roller - Stud Type

75 mm 583 mm
41 kg MS 30/560

MCGILL FCFE 2 1/4 Cam Follower and Track Roller - Stud Type

2.08 18mm
0.58 KGS 52

MCGILL FCFE 1 3/4 Cam Follower and Track Roller - Stud Type

853 2500
2900 In Stock

MCGILL MCFE 22 SBX Cam Follower and Track Roller - Stud Type

In Stock 10.2
Plastic 2mm205wicrdum-timken

MCGILL MCFE 19 SBX Cam Follower and Track Roller - Stud Type

40mm 30.2mm
80mm 8500

MCGILL MCFE 19 S Cam Follower and Track Roller - Stud Type

385 N·m SNL 216 RU
39 mm H 316 E

MCGILL MCF 72 B Cam Follower and Track Roller - Stud Type

1.5 mm 110 mm
6 mm 0.6 mm
1/12