LINK BELT B423L Insert Bearings Cylindrical OD

R1:60.325 mm; Cap bolt, SAE grade:8; P60°:121 kN; P120°:45.4 kN; Lock washer:W 15; P150°:40.5 kN; End plug (suffix Y):EPR 8; h:40.481 mm; P180°:49.8 kN; dc:71.425 mm;

Basic dynamic load rating C:14.7 kN; Fatigue load limit Pu:3.25 kN; U:17 mm; Ew:30 mm; Reference speed:16000 r/min; Basic static load rating C0:27.5 kN; Fw:26 mm; Mass needle roller and cage assembly:0.015 kg; Limiting speed:18000 r/min;

D:22 mm; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ max.:0.1; B:20 mm; d:10 mm; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.037 kg; Tolerance shaft:h8;

Basic Static Radial Load Rating Co:80000 N; B:39.70 mm; Basic Dynamic Radial Load Rating C:88400 N; Sealed Speed Rating n3:3200 rpm; Grease Speed Rating n1:3200 rpm; Accessories:No Shield, no Seal; D:125.0000 mm; Oil Speed Rating n2:4300 rpm; d:70.000 mm; Fillet Radius ra:1.50 mm;

db:92.075 mm; Appropriate attachment bolt size G:0.75 in; Stabilizing ring:SR-16-13; Cap bolt recommended tightening torque:149.1 N·m; H:169.863 mm; RG:3/8 NPT; h:31.75 mm; N1:22.225 mm; Max. speed for PosiTrac Plus seal:1450 r/min; Cap bolt:2 x 5/8-11 UNC;

B:194 mm; ra max.:4 mm; d:380 mm; da max.:445 mm; D:620 mm; s1 max.:25.4 mm; D1 ≈:551 mm; Fatigue load limit Pu:520 kN; Limiting speed:1000 r/min; Basic dynamic load rating C:4400 kN;

Grease Speed Rating n1:1100 rpm; Basic Dynamic Radial Load Rating C:780000 N; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:1500000 N; D:440.0000 mm; Oil Speed Rating n2:1400 rpm; B:144.00 mm; Fillet Radius ra:3.00 mm; d:240.000 mm;

Grease Speed Rating Open/Shielded n1:6000 rpm; d:80.000 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:13000 N; D:100.0000 mm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:13700 N; B:10.00 mm; Sealed Speed Rating n3:3600 rpm; Oil Speed Rating Open/Shielded n2:7000 rp

Appropriate attachment bolt size G:1.25 in; Eye bolt:2 x 1/2-13 UNC; R2:42.069 mm; Cap bolt:1 1/8-7 UNC; P180°:160 kN; A2:339.725 mm; P150°:136 kN; Initial grease fill:1672.65 g; R1:120.65 mm; Max. speed for Taconite seal:385 r/min;

db min.:65 mm; Fatigue load limit Pu:12 kN; Da max.:92 mm; ra max.:2 mm; rb max.:1.5 mm; d:55 mm; Reference speed:5300 r/min; Da min.:88 mm; Mass bearing:0.7 kg; Limiting speed:6700 r/min;

Grease Speed Rating n1:3200 rpm; D:190.0000 mm; d:105.000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Accessories:One Shield; Basic Static Radial Load Rating Co:104000 N; Basic Dynamic Radial Load Rating C:133000 N; Fillet Radius ra:2.00 mm; B:36.00 mm; Sealed Speed Rating n3:2200 rpm;

Accessories:One Shield; B:22.00 mm; d:60.000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:56100 N; Grease Speed Rating Open/Shielded n1:4900 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:51000 N;

Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.004 kg; Tolerance shaft:h8; D:10 mm; B:10 m

r, r1,2 min.:0.6 mm; Mass inner ring:0.089 kg; d:45 mm; F:52 mm; B:22 mm;