BEARINGS LIMITED 28920 Ball Bearings

P120°:53.4 kN; Adapter sleeve assembly:SNW 18x3.1/16; Pa:10.9 kN; P180°:58.7 kN; RG:3/8 NPT; Labyrinth ring:2 x LOR 186; Cap bolt recommended tightening torque:149.1 N·m; A2:149.225 mm; Bearing limiting speed:5300 r/min; ba:40.481 mm;

Mass bearing:250 kg; Minimum axial load factor A:72; da min.:1089 mm; Basic dynamic load rating C:4400 kN; Reference speed:140 r/min; D1:956 mm; Limiting speed:280 r/min; B:40.5 mm; D:1120 mm; Basic static load rating C0:30000 kN;

Fatigue load limit Pu:980 kN; D:820 mm; Calculation factor Y0:2.2; d2 ≈:640 mm; Calculation factor e:0.3; Basic static load rating C0:14000 kN; Basic dynamic load rating C:7530 kN; d:560 mm; Calculation factor Y2:3.4; D1 ≈:739 mm;

B:39.00 mm; Grease Speed Rating Open/Shielded n1:3300 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:138000 N; Oil Speed Rating Open/Shielded n2:4000 rpm; d:80.000 mm; Basic Static Radial Load Rating Co:129000 N; D:170.0000 mm; Accessories:Two Shields & Snap-R;

B:34.00 mm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:42300 N; Oil Speed Rating n2:25000 rpm; Basic Static Radial Load Rating Co:37500 N; d:35.000 mm; Grease Speed Rating n1:17000 rpm; Fillet Radius ra:1.00 mm; D:72.0000 mm;

db min.:20.5 mm; Mass bearing:0.055 kg; Basic static load rating C0:14.6 kN; Db min.:32 mm; d:15 mm; Da min.:30 mm; Calculation factor Y:1.7; Da max.:30.5 mm; Dimension series:2CC; T:11.75 mm;

d:220 mm; with cylindrical bore:710 min-1; Dynamic (Cr):9 mm; with tapered bore:840 min-1; rs (min):4 mm; B:144 mm; Oil:285.740 kN; Static (Cor):16.7 mm; Pu:2040 kN; Grease:3290 kN;

Mass adapter sleeve assembly:1.45 kg; Locking device:MB 20; B1:58 mm; B4:20 mm; d:100 mm; Lock nut:KM 20; G:M 100x2; B:18 mm; d3:130 mm; d1:88.9 mm;

d:120 mm; dynamic Cr:368.880 kN; H:70 mm; D1:123 mm; Grease:790 min-1; d1:205 mm; Pu:34.570 kN; Oil:1 060 min-1; static Cor:977.000 kN; rs (min):2.1 mm;

J min.:571.5 mm; S:4.763 mm; P180°:145 kN; N1:34.925 mm; Ca:107.798 mm; Housing:SAF 540; Cap bolt recommended tightening torque:271.2 N·m; PG:1/4 NPT; Da:359.999 mm; Appropriate attachment bolt size G:1.25 in;

D:55.0000 mm; d:30.000 mm; B:26.00 mm; Fillet Radius rb:0.30 mm; Grease Speed Rating n1:9600 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:25500 N; Basic Static Radial Load Rating Co:21200 N;

Dimension DA:106.4 mm; Basic Static Radial Load Rating Co:15300 N; Insert Bearing IB:ZMaRC; Shaft Diameter D:35 mm; Weight W:0.66 kg; Height T:46.4 mm; Diameter N:14.0 mm; Basic Dynamic Radial Load Rating C:25500 N; Dimension A2:17.0 mm; Distance J:92.0 mm;

d:75.000 mm; Oil Speed Rating n2:3600 rpm; Basic Static Radial Load Rating Co:140000 N; Basic Dynamic Radial Load Rating C:168000 N; Accessories:No Shield, no Seal,; Fillet Radius ra:2.00 mm; D:160.0000 mm; B:71.40 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm;

Diameter N:0.5469 in; Dimension DA:3.5000 in; Distance J:5.1250 in; Height T:1.8281 in; Dimension A1:1.3750 in; Basic Static Radial Load Rating Co:3440 lbf; Dimension L:3.7813 in; Height H:6.1250 in; Insert Bearing IB:ZMaRC; Dimension A2:0.6563 in;

Fillet Radius ra:2.00 mm; B:58.70 mm; Accessories:Two Shields; d:65.000 mm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:138000 N; Basic Static Radial Load Rating Co:108000 N; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; Grease Speed Rating n1:3200 rpm;